[Introduction]

Connect or disconnect probes to or from the analyzer
mainframe only when the analyzer is turned off.

To connect probes to the unit under test (UUT), either
turn off the power to the UUT or make certain that the
analyzer power is on.  NEVER connect an unpowered probe
to a UUT with the power on!

To power down, first disconnect the probe(s) from the
UUT, or else power down th eUUT, before turning off the
power to the analyzer.

The top line of the screen displays the date, the menu
name, the time and the active setup name.  An * in front
of the setup name indicates that the latest changes in
the setup have not been saved.

Active keys are shown on the menu bar at the bottom of
the screen or within the pop-up windows.  Use the MENU
key to summon the main menu.  To return to the display
from the main menu, press the DON'T CARE key.
[Next Page:^     Prev. Page:v     Exit Notes:MENU