Keith's Electronics Blog

The chronologically next two synthesizers for my pulse sound programming demo were to be my Unique DBE (Crumar BIT 01 North American rebrand) and Roland Juno-106, but alas, both of them have problems (the Juno had been working for the last two weeks but Sunday I left it on for a couple of hours and now it doesn’t work) that I’m going to have to delay a bit before fixing.

So on to the Roland JX-8P, my first and most sentimental synthesizer. Ken Janzen (the younger Ken Janzen) was a music whiz who’d occasionally bring his JX-8P (and sometimes sequencer) to church for special music during my formative years. Then in college I got access to another JX-8P thanks to the forward-thinking Don Kehrberg, which I ended up buying from the college a few years later. This one is my third — that is, I have three now — just picked up for a good price on Marketplace and noting some glitchy contacts that will require attention sooner or later. I love this synthesizer obviously for the nostalgia but also for the fat sounds it makes with detuned oscillators, a little bark from the VCF, and what I find to be a particularly lush chorus.

Features:

• 6-voice polyphony
• Stereo audio output
• 2 digitally-controlled oscillators (DCOs) — sawtooth, PWM, square, or triangle — pitch is controlled digitally and is as solid as you want it to be
• 1 low-frequency oscillator (LFO) — sine, square, or random — that can modulate pitch, PWM, and VCF (not amplitude)
• 2 ADSR envelope generators that can modulate pitch, PWM, VCF, and amplitude
• Velocity-sensing keys and performance
• Onboard chorus

Let’s get programming.

(more…)

The first synthesizer for my pulse sound programming demo is my Behringer Odyssey, an analog-circuit-faithful replica of the legendary ARP Odyssey, which was first manufactured in 1972.

Features:

• Monophonic — plays only one note at a time — or paraphonic (can split the two oscillators to separate notes)
• Monaural — one-channel audio output
• 2 voltage-controlled oscillators (VCOs) — PWM or sawtooth — pitch is controlled by voltage and is … variable
• 1 low-frequency oscillator (LFO) — square or sine — that can modulate pitch, PWM, VCF, and amplitude
• 2 envelope generators — AR and ADSR — that can modulate pitch, PWM, VCF, and amplitude
• On the Behringer replica, velocity-sensing keys but no incorporation of the velocity in the Odyssey’s audio; for MIDI transmission only
• Numerous other features that I won’t use and one that I’ll describe when I do

Let’s get programming.

(more…)

Keith, why do you need so many synthesizers?

Well, they do different things.

I do have some synthesizers that only have built-in sounds; but the ones that speak to me the most are the ones where you build the sounds yourself. I’ve been thinking about a particular sound and how it would be made differently (and to different degrees of success) on different synthesizers and thought I’d demo that process on a representative sample of each underlying architecture.

Traditional musical notation doesn’t have a clear way to capture exactly what I have in mind, so let me walk you through it: A low E is gradually faded in; then imperceptibly at first it starts getting pulses on the quarter notes, with the underlying sound held constant between the pulses as only the pulses grow louder; then the pulses speed up to eighth notes and the pitch starts changing in a repeating pattern. The measure and repeat counts are arbitrary and selected here mainly to have room to write the notations.

Further and not notated, I want the held note to be a fairly dull sound and I want the pulses to be “w-w-w” and eventually “wuh-wuh-wuh” sounds — not sharp; also dull.

What’s going to be difficult about programming synthesizers to do this is increasing the dynamic (amplitude) of only the pulses while holding the drone at a constant amplitude. Only one that I have lined up can actually do it natively and I believe only other other can do it with coaxing.

MuseScore

As a side note for the curious, that score clip is engraved using MuseScore, the zero-cost open-source music notation software. I have a fair amount of sheet music I notated years ago in commercial music notation software that went out of business and now I can’t open it and I didn’t have the foresight to export to PDF; so where I’m lucky, I still have a hardcopy I can find and where I’m unlucky, it’s locked away and I don’t expect to be able to get it back.

From time to time I’d look for an open-source replacement and kept finding MuseScore but never did anything with that information until earlier this year, when I needed to do more music notation, installed it, and love it. It’s fairly easy to use; it does gorgeous typesetting; and it gives you control over every tiny little detail of the typesetting.

If you’re looking to try it, I highly recommend keeping it open in one window and Gemini open in another. When you want to do something, just ask Gemini how. It’s infinitely patient and often correct. Very good for instructions on basic operations; nearly useless for deep menu diving for fine-tuning typesetting.